Jeep GLADIATOR 2023 Page 119 Owner'S Manual Download

Page: 119 / 420

GETTING TO KNOW YOUR INSTRUMENT PANEL

117



ACC Proximity Warning



ACC Unavailable Warning

NOTE:

The instrument cluster display will return to the last

display selected after five seconds of no ACC display

activity

page 162.

Fuel Economy

Push and release the up

or down

arrow button until

the Fuel Economy icon is highlighted in the instrument

cluster display. Push and hold the OK button to reset

average fuel economy feature.

Toggle left

or right

to select a display with or without

Current Fuel Economy Information.



Range – The display shows the estimated distance

(mi or km) that can be traveled with the fuel remaining

in the tank. When the Range value is less than 10 miles

(16 km), the Range display will change to a “LOW”

message. Adding a significant amount of fuel to the

vehicle will turn off the “LOW” message and a new

Range value will display. Range cannot be reset

through the OK button.

NOTE:

Significant changes in driving style or vehicle loading will

greatly affect the actual drivable distance of the vehicle,

regardless of the Range displayed value.



Average – The display shows the average fuel economy

(MPG, L/100km, or km/L) since the last reset.



Current – The display shows the current fuel economy

(MPG, L/100km, or km/L) while driving.

Trip

Push and release the up

or down

arrow button until

the Trip icon/title is highlighted in the instrument cluster
display, then push and release the left

or right

arrow button to select Trip A or Trip B.
The Trip A and Trip B information will display the following:



Distance



Average Fuel Economy



Elapsed Time

Hold the OK button to reset all the information.

Stop/Start — If Equipped

Push and release the up

or down

arrow button until

the Stop/Start icon/title is highlighted in the instrument

cluster display. The screen will display the Stop/Start

status.

Audio

Push and release the up

or down

arrow button until

the Stop/Start icon/title is highlighted in the instrument

cluster display. The screen will display the Stop/Start

status.
Phone Call Status
When a call is incoming, a Phone Call Status pop-up will

display on the screen. The pop-up will remain until the

phone is answered or ignored.

NOTE:

The call status will temporarily replace the previous media

source information displayed on the screen. When the

pop-up is no longer displayed, the display will return to the

last used screen.

Stored Messages

Push and release the up

or down

arrow button until

the Messages Menu item is highlighted. This feature

shows the number of stored warning messages. Pushing
the right

arrow button will allow you to see what the

stored messages are.
When no messages are present, main menu icon will be a

closed envelope, and “No Stored Messages” will display.

Screen Setup

NOTE:

The Screen Setup feature can only be used while the

vehicle is not in motion.

Push and release the up

or down

arrow button until

the Screen Setup Menu Icon/Title is highlighted in the

instrument cluster display. Push and release the

OK button to enter the submenus and follow the prompts

on the screen as needed. The Screen Setup feature allows

you to change what information is displayed in the

instrument cluster as well as the location in which that

information is displayed.

NOTE:

Based upon equipment options and current vehicle

status, some of the features may not be available.

23_JT_OM_EN_USC_t.book Page 117

Summary of Contents for GLADIATOR 2023





































































































































































































































































































































































































































Search results

Summary of Contents for GLADIATOR 2023

Reviews:

Related manuals for GLADIATOR 2023

Brands by name

Popular brands

Jeep GLADIATOR 2023, Owner'S Manual

Search results

Summary of Contents for GLADIATOR 2023

Reviews:

Related manuals for GLADIATOR 2023

Brands by name

Popular brands