Jeep GLADIATOR 2023 Page 201 Owner'S Manual Download

Page: 201 / 420

199

MULTIMEDIA

UCONNECT SYSTEMS

For detailed information about your Uconnect 4C/4C NAV

With 8.4-inch Display system, refer to your Uconnect Radio

Instruction Manual.

NOTE:

Uconnect screen images are for illustration purposes only

and may not reflect exact software for your vehicle.

CYBERSECURITY

Depending on applicability, your vehicle may be able to

send or receive information from a wired or wireless

network. This information allows systems and features in

your vehicle to function properly.
Your vehicle may be equipped with certain security

features to reduce the risk of unauthorized and unlawful

access to vehicle systems and wireless communications.

Vehicle software technology continues to evolve over time

and FCA US LLC, working with its suppliers, evaluates and

takes appropriate steps as needed. As always, if you

experience unusual behavior, contact an authorized

dealer immediately,

page 400, or refer to your

Uconnect Radio Instruction Manual for additional contact

information.

The risk of unauthorized and unlawful access to your

vehicle systems may still exist, even if the most recent

version of vehicle software (such as Uconnect software) is

installed.

NOTE:

To help further improve user experience, features,

stability, etc., and minimize the potential risk of a security

breach, vehicle owners should routinely check

www.driveuconnect.com (US Residents) or www.driveuco

nnect.ca (Canadian Residents) to learn about available

Uconnect software updates.

UCONNECT SETTINGS

The Uconnect system uses a combination of buttons on

the touchscreen and buttons on the faceplate located on

the center of the instrument panel. These buttons allow

you to access and change the Customer Programmable

Features. Many features can vary by vehicle.
Buttons on the faceplate are located below and/or beside

the Uconnect system in the center of the instrument

panel. In addition, there is a SCROLL/ENTER control knob

located on the right side. Turn the control knob to scroll

through menus and change settings. Push the center of

the control knob one or more times to select or change a

setting.
Your Uconnect system may also have SCREEN OFF and

MUTE buttons on the faceplate.
Push the SCREEN OFF button on the faceplate to turn off

the Uconnect screen. Push the button again or tap the

screen to turn the screen on.
Press the Back Arrow button to exit out of a Menu or

certain option on the Uconnect system.

WARNING!



ONLY insert trusted media devices/components into

your vehicle. Media of unknown origin could possibly

contain malicious software, and if installed in your

vehicle, it may increase the possibility for vehicle

systems to be breached.



As always, if you experience unusual vehicle

behavior, contact an authorized dealer immediately.

23_JT_OM_EN_USC_t.book Page 199

Summary of Contents for GLADIATOR 2023





































































































































































































































































































































































































































Search results

Summary of Contents for GLADIATOR 2023

Reviews:

Related manuals for GLADIATOR 2023

Brands by name

Popular brands

Jeep GLADIATOR 2023, Owner'S Manual

Search results

Summary of Contents for GLADIATOR 2023

Reviews:

Related manuals for GLADIATOR 2023

Brands by name

Popular brands