Jeep GLADIATOR 2023 Page 294 Owner'S Manual Download

Page: 294 / 420

292

SAFETY

The passenger seat assembly contains critical OCS

components that may affect Passenger Advanced Front

Air Bag inflation. In order for the OCS to properly classify

the seated weight of a front seat passenger, the OCS

components must function as designed. Do not make any

modifications to the front passenger seat components,

assembly, or to the seat cover. If the seat, trim cover, or

cushion needs service for any reason, take the vehicle to

an authorized dealer. Only FCA US LLC approved seat

accessories may be used.
The following requirements must be strictly followed:



Do not modify the front passenger seat assembly or

components in any way.



Do not use prior or future model year seat covers or

cushions not designated by FCA US LLC for the specific

model being repaired. Always use the correct seat

cover and cushion specified for the vehicle.



Do not replace the seat cover or cushion with an

aftermarket seat cover or cushion.



Do not add a secondary seat cover or mat.



At no time should any Supplemental Restraint System

(SRS) component or SRS related component or

fastener be modified or replaced with any part except

those which are approved by FCA US LLC.

Knee Impact Bolsters

The Knee Impact Bolsters help protect the knees of the

driver and front passenger, and position the front

occupants for improved interaction with the front air bags.

Supplemental Side Air Bags

Supplemental Seat-Mounted Side Air Bags (SABs)
This vehicle is equipped with Supplemental Seat-Mounted

Side Air Bags (SABs).
Supplemental Seat-Mounted Side Air Bags (SABs) are

located in the outboard side of the front seats. The SABs

are marked with a “SRS AIRBAG” or “AIRBAG” on a label or

on the seat trim on the outboard side of the seats.
The SABs may help to reduce the risk of occupant injury

during certain side impacts, in addition to the injury

reduction potential provided by the seat belts and body

structure.

Supplemental Seat-Mounted Side Air Bag Label

When the SAB deploys, it opens the seam on the outboard

side of the seatback’s trim cover. The inflating SAB

deploys through the seat seam into the space between the

occupant and the door.

WARNING!



Unapproved modifications or service procedures to

the passenger seat assembly, its related compo

nents, seat cover, or cushion may inadvertently

change the air bag deployment in case of a frontal

collision. This could result in death or serious injury

to the front passenger if the vehicle is involved in a

collision. A modified vehicle may not comply with

required Federal Motor Vehicle Safety Standards

(FMVSS) and/or Canadian Motor Vehicle Safety

Standards (CMVSS).



If it is necessary to modify the air bag system for

persons with disabilities, contact an authorized

dealer.

WARNING!



Do not drill, cut, or tamper with the knee impact

bolsters in any way.



Do not mount any accessories to the knee impact

bolsters such as alarm lights, stereos, citizen band

radios, etc.

23_JT_OM_EN_USC_t.book Page 292

Summary of Contents for GLADIATOR 2023





































































































































































































































































































































































































































Search results

Summary of Contents for GLADIATOR 2023

Reviews:

Related manuals for GLADIATOR 2023

Brands by name

Popular brands

Jeep GLADIATOR 2023, Owner'S Manual

Search results

Summary of Contents for GLADIATOR 2023

Reviews:

Related manuals for GLADIATOR 2023

Brands by name

Popular brands