Jeep GLADIATOR 2023 Page 302 Owner'S Manual Download

Page: 302 / 420

300

SAFETY

Frequently Asked Questions About Installing Child Restraints With LATCH

What is the weight limit (child’s weight of the child

restraint) for using the LATCH anchorage system to attach

the child restraint?

65 lb (29.5 kg)

Use the LATCH anchorage system until the combined

weight of the child and the child restraint is 65 lb

(29.5 kg). Use the seat belt and tether anchor instead of

the LATCH system once the combined weight is more than

65 lb (29.5 kg).

Can the LATCH anchorages and the seat belt be used

together to attach a rear-facing or forward-facing child

restraint?

Do not use the seat belt when you use the LATCH

anchorage system to attach a rear-facing or forward-facing

child restraint.
Booster seats may be attached to the LATCH anchorages if

allowed by the booster seat manufacturer. See your

booster seat owner’s manual for more information.

Can a child seat be installed in the center position using

the inner LATCH lower anchorages from the outboard

seating positions?

Yes

You can install child restraints with flexible lower anchors

in the center position. The inner anchorages are

19.2 inches (488 mm) apart. Do not install child restraints

with rigid lower anchors in the center position.

Can two child restraints be attached using a common

lower LATCH anchorage?

Never “share” a LATCH anchorage with two or more child

restraints. If the center position does not have dedicated

LATCH lower anchorages, use the seat belt to install a child

seat in the center position next to a child seat using the

LATCH anchorages in an outboard position.

Can the rear-facing child restraint touch the back of the

front passenger seat?

Yes

The child seat may touch the back of the front passenger

seat if the child restraint manufacturer also allows

contact. See your child restraint owner’s manual for more

information.

Can the rear head restraints be removed?

Yes

The center head restraint can be removed if it interferes

with the installation of the child restraint

page 44.

23_JT_OM_EN_USC_t.book Page 300

Summary of Contents for GLADIATOR 2023





































































































































































































































































































































































































































Search results

Summary of Contents for GLADIATOR 2023

Reviews:

Related manuals for GLADIATOR 2023

Brands by name

Popular brands

Jeep GLADIATOR 2023, Owner'S Manual

Search results

Summary of Contents for GLADIATOR 2023

Reviews:

Related manuals for GLADIATOR 2023

Brands by name

Popular brands