Jeep Compass, Operating Information Manual

Page: 250 / 310

4. Replace bulb and re-install rubber cap se-
curely to housing.
NOTE:
These are halogen bulbs. Take care not to
touch the bulb with your fingers. Body oils
from your fingers could cause excessive
heat buildup which reduces bulb life.
Fog Lamps
1. Access lamp through the lower fascia cutout.
2. Remove electrical connector from bulb.
3. Remove bulb from housing.
Side Repeater Lamps
1. Push side repeater to one side to release the
spring tension and pull outward.
2. Twist socket one quarter turn and pull socket
from lens.
3. Pull bulb straight from socket and replace.
Rear Tail/Stop Lamps
Light is an LED assembly. See your authorized
dealer for replacement.
Rear Turn Signal And Backup
Lamps
1. Remove the two push-pins from the tail lamp
housing.
2. Grasp the tail lamp and pull firmly to disen-
gage the lamp from the aperture panel.
3. Twist and remove socket from lamp.
4. Remove bulb from socket and replace.
License Lamps
1. Remove the lens cover while holding the tab.
2. Remove the bulb and replace.
3. Install the lens cover (engage it until it snaps in).
Center High-Mounted Stoplamp
Light is an LED assembly. See your authorized
dealer for replacement.
246