Jeep Compass, Operating Information Manual

Page: 141 / 310

Controlling The iPod® Or External
USB Device Using Radio Buttons
To get into the iPod®/USB/MP3 control mode
and access a connected audio device, either
press the “AUX” button on the radio faceplate or
press the VR button and say
"
USB
"
or
"
Switch
to USB
"
. Once in the iPod®/USB/MP3 control
mode, audio tracks (if available from audio
device) start playing over the vehicle’s audio
system.
Play Mode
When switched to iPod®/USB/MP3 control
mode, the iPod® or external USB device auto-
matically starts Play mode. In Play mode, the
following buttons on the radio faceplate may be
used to control the iPod® or external USB
device and display data:
•
Use the TUNE control knob to select the next
or previous track.
•
Turning it clockwise (forward) by one click,
while playing a track, skips to the next
track or press the VR button and say
"
Next
Track
"
.
•
Turning it counterclockwise (backward) by
one click, will jump to the previous track in
the list or press the VR button and say
"
Previous Track
"
•
Jump backward in the current track by press-
ing and holding the <<
RW button. Holding
the << RW button long enough will jump to
the beginning of the current track.
•
Jump forward in the current track by pressing
and holding the
FF >> button.
•
A single press backward << RW or forward
FF >> will jump backward or forward respec-
tively, for five seconds.
•
Use the << SEEK and SEEK >> buttons to
jump to the previous or next track. Pressing
the
SEEK >> button during play mode will
jump to the next track in the list, or press the
VR button and say
"
Next or Previous Track
"
.
•
While a track is playing, press the INFO
button to see the associated metadata (artist,
track title, album, etc.) for that track. Pressing
the
INFO button again jumps to the next
screen of data for that track. Once all screens
have been viewed, the last INFO button
press will go back to the play mode screen on
the radio.
•
Pressing the REPEAT button will change the
audio device mode to repeat the current
playing track or press the VR button and say
"
Repeat ON
"
or
"
Repeat Off
"
.
•
Press the SCAN button to use iPod®/USB/
MP3 device scan mode, which will play the
first 10 seconds of each track in the current
list and then forward to the next song. To stop
SCAN mode and start playing the desired
track, when it is playing the track, press the
SCAN button again. During Scan mode,
pressing the << SEEK and SEEK >> buttons
will select the previous and next tracks.
•
RND button (available on sales code RES
radio only): Pressing this button toggles be-
tween Shuffle ON and Shuffle OFF modes for
the iPod® or external USB device, or press
the VR button and say
"
Shuffle ON
"
or
"
Shuffle Off
"
. If the RND icon is showing on
the radio display, then the shuffle mode is
ON.
137