Jeep Compass, Operating Information Manual

Page: 76 / 310

•
Note that only the phonebook in the current
language is deleted.
•
Automatic downloaded phonebook entries
cannot be deleted or edited.
List All Names In The Uconnect®
Phonebook
•
Press the button to begin.
•
After the “Ready” prompt and the following
beep, say “Phonebook List Names”.
•
The Uconnect® Phone will play the names of
all the phonebook entries, including the
downloaded phonebook entries, if available.
•
To call one of the names in the list, press the
button during the playing of the desired
name, and say “Call”.
NOTE:
The user can also exercise “Edit” or “De-
lete” operations at this point.
•
The Uconnect® Phone will then prompt you
as to the number designation you wish to
call.
•
The selected number will be dialed.
Phone Call Features
The following features can be accessed through
the Uconnect® Phone if the feature(s) are avail-
able on your mobile service plan. For example,
if your mobile service plan provides three-way
calling, this feature can be accessed through
the Uconnect® Phone. Check with your mobile
service provider for the features that you have.
Answer Or Reject An Incoming Call — No
Call Currently In Progress
When you receive a call on your mobile phone,
the Uconnect® Phone will interrupt the vehicle
audio system, if on, and will ask if you would like
to answer the call. Press the
button to ac-
cept the call. To reject the call, press and hold
the
button until you hear a single beep,
indicating that the incoming call was rejected.
Answer Or Reject An Incoming Call — Call
Currently In Progress
If a call is currently in progress and you have
another incoming call, you will hear the same
network tones for call waiting that you normally
hear when using your mobile phone. Press the
button to place the current call on hold and
answer the incoming call.
NOTE:
The Uconnect® Phone compatible phones
in the market today do not support rejecting
an incoming call when another call is in
progress. Therefore, the user can only an-
swer an incoming call or ignore it.
Making A Second Call While Current Call Is
In Progress
To make a second call while you are currently
on a call, press the
button and say “Dial” or
“Call” followed by the phone number or phone-
book entry you wish to call. The first call will be
on hold while the second call is in progress. To
go back to the first call, refer to “Toggling
Between Calls” in this section. To combine two
calls, refer to “Conference Call” in this section.
Place/Retrieve A Call From Hold
To put a call on hold, press the button until
you hear a single beep. This indicates that the
call is on hold. To bring the call back from hold,
press and hold the
button until you hear a
single beep.
Toggling Between Calls
If two calls are in progress (one active and one
on hold), press the
button until you hear a
72