Jeep COMPASS 4xe, Manual

Page: 30 / 153

29
"MODE 3" CHARGING CABLE
(optional)
The car can be equipped with a "
Mode 3
"
charging cable fi g. 10, located inside a
special bag fi g. 11, placed in the boot.
The "
Mode 3
" charging cable:

complies with EN 61851- 1,
EN 62196- 1 and
EN 62196- 2
standards;

can be used for a minimum
temperature of -40°C up to a
maximum temperature of +50°C.
This type of cable allows you to connect
to public alternating current (AC) charging
stations. The charging speed may be
faster than charging through a domestic
power socket.
Using this type of cable it is possible to
charge the car with a current of up to
32A.
NOTE After use, remember to replace
the protective covers on both sides of
the charging cable correctly to prevent
moisture and/or dust from entering the
cable charging socket connections.
10 J0B6140E
11 J0B6080E
Maintenance / cleaning of the charging
system
The device is maintenance-free.
If you need to clean the device, use a
soft cloth slightly dampened with a mild
detergent solution, then wipe dry with a
dry cloth. Do not use abrasive products or
fl ammable substances (e.g. alcohol, petrol
or their derivatives).
Do not
wash the
device with water, hazard of fi re or electric
shock with the risk of serious injury or
death.
WARNING Only clean the cable when it
is DISCONNECTED from both the public
charging station and the charging socket
located on the vehicle.