Jeep COMPASS 4xe, Manual

Page: 46 / 153

45
CHARGING FUNCTIONS
CHARGING SCHEDULE
By acting on the
UConnect™
system
display and selecting the "Charging
Schedule" function you can set the start
and end time at which the high-voltage
battery is to be charged.
For more information see the section
"Knowing the instrument panel and
multimedia" in this supplement.
If the vehicle is charging, but it is outside
the charging range set via the
UConnect™
system, the LED (A) fi g. 34 (located near
the charging socket) will light up and the
LED (B) will turn on with blue light.
If charging is in progress, the LEDs will
light on with green
fl ashing/green steady
light depending on the charge status of
the battery portion indicated by the LED.
34 J0B6034E
INTERRUPTING THE CHARGING
PROCEDURE
By inserting the charging connector of
the cable into the charging socket on the
vehicle, charging starts automatically.
By pressing the immediate charge
button (A)
fi g. 35 it is possible to”- pass"
a possible charge schedule already set
through the display of the
UConnect™
system (for further information refer to
the chapter "
UConnect™
8.4” NAV DAB
Radio /
UConnect™
8.4” DAB Radio" in
the section "Knowing the instrument panel
and Multimedia".
To stop charging, unlock the doors by
pressing the button on the key or the
similar button on the driver's side door
panel trim.
LED (B)
fi g. 35 illuminates when the
vehicle is charging without a set interval
or in the case of an immediate charging
operation.
If charging is interrupted, the LED (B)
turns off.