Jeep COMPASS 4xe, Manual

Page: 75 / 153

KNOWING THE INSTRUMENT P
ANEL AND MUL
TIMEDIA
74
Charging time
The charging time varies depending on:

the high-voltage battery load capacity;

the age of the high-voltage battery and
its temperature;

the type of cable used ("Mode 2"
cable or "Mode 3" cable) and,
consequently, the selected charging
mode (connection to a domestic
socket, a domestic charging station
(wallbox) or a public charging station);

any external or environmental factors
such as, for example, activation
of the air conditioner, the outside
temperature, the temperature of the
high-voltage battery, the country
where charging is carried out.
Charging times can be longer if there is a
thermal protection device in the system,
which reduces the charging current to the
socket to which the vehicle is connected.
NOTE Charging times and currents refer
to systems powered at 230V and 50Hz
under nominal conditions and ambient
temperature of 20°C +/- 5°C.
NOTES
The following information refers to the use of the "Mode 2" charging cables supplied
with the vehicle and "Mode 3" supplied separately as optional equipment by FCA. For
connections with Jeep Easy Wallboxes, refer to the "JEEP easyWallbox" section in the
"Knowing your vehicle" chapter.
The charging times shown in the table below are estimates based on charging the high-
voltage battery having a state of charge lower than 1%.
Type of charging cable used
Standard charge time
("Level 5")
Estimated maximum charge
time ("Level 1")
"Mode 2" charging cable (*) About 4 Hours About 22 Hours
"Mode 3" charging cable (**) About 1 hour 45 minutes About 9 Hours
(*) The specified
standard charge time
is calculated for the maximum level (5) “high” set on the
UConnect TM
system display, which corresponds to a maximum current consumption of 13 A. Selecting
a lower power level will increase the charging time in a non-linear manner, up to a maximum of 22
hours with level (1) “low” set on the
Uconnect
TM
system display, which corresponds to a current
consumption of 2.7 A.
NOTE According to the country where the vehicle is sold and the "Charging level"
("Level 1" low or "Level 5" high) set on the display of the
Uconnect
TM
system, the current
consumption values (from a minimum of 2.7 A to a maximum of 13 A) and the related
charging times may vary as the "Mode 2" charging cable may have maximum permissible
values below 13 A.
(**) The specified
standard charge time
is calculated for the maximum level (5) “high” set on the
UConnect
TM
system display, which corresponds to a maximum current consumption of 32 A. Selecting
a lower power level will increase the charging time in a non-linear manner, up to a maximum of 9
hours with level (1) “low” set on the
Uconnect
TM
system display, which corresponds to a current
consumption of 6.4 A.