Jeep COMPASS 4xe, Manual

Page: 37 / 153

KNOWING YOUR VEHICLE
36
The time required to charge the high-
voltage battery depends on several
factors: for more information see the
description in the "Charging time"
paragraph in the "Knowing the instrument
panel and multimedia" section.
If the passenger compartment
preconditioning is activated, the high-
voltage battery charging time will be
extended. The time required for heating/
cooling the car is mainly determined by
the outside temperature.
WARNING The maximum power
consumption of the charging socket
depends on the type of contract to which
the user is subscribed, the type of cable
used and the charge level set in the
UConnect™
8.4” Radio system menu.
WARNING Use only the charging cable
supplied with the car or a replacement
cable recommended by FCA.
WARNING The high-voltage battery
must be charged in accordance with the
maximum amperage rating allowed by
local and national recommendations for
charging electric/hybrid vehicles.
END OF CHARGING
PROCEDURE
The charging procedure ends when all
the LEDs (A)
fi g. 21, located next to the
charging socket, will light up in green with
a steady light (during the charging phase
the
fi rst LED will fl ash, while the other
LEDs will be on with a steady light).
21 J0B6035E