Jeep COMPASS 4xe, Manual

Page: 63 / 153

KNOWING THE INSTRUMENT P
ANEL AND MUL
TIMEDIA
62
SYMBOLS ON THE DISPLAY
Red Symbols
Symbol What it means
VEHICLE CHARGING PROCEDURE FAILURE
This symbol is shown on the instrument panel display, with the vehicle stationary, in the case of a fault during the high-
voltage battery charging procedure.

failures in the charging system
, in this case disconnect and then reconnect the charging cable to the charging socket
or, in the case of charging at a public charging station, look for another power supply point. If the symbol and the message
on the display continue to be displayed, contact the Jeep Dealership.

failures in the public charging station
(because it may have been deactivated or there may be a failure). We
recommend that you try charging your car at another public charging station. If the symbol and the message on the display
continue to be displayed, contact the Jeep Dealership.
TRACTION BATTERY FAILURE
The symbol appears on the instrument panel display in case of traction battery failure. Contact a Jeep Dealership.
HYBRID-ELECTRIC SYSTEM FAILURE
The symbol appears on display of the instrument panel in case of hybrid-electrical system failure. The display will also
show a dedicated message. Contact a Jeep Dealership.
PERFORMANCE LIMITATION
The symbol is shown on the instrument panel display if the acceleration of the car is limited due to a reduction in
performance of the heat engine (e.g. including if there is no fuel) or the electric motor. If the symbol remains on while
driving, contact a Jeep Dealership.
NOTE If the automatic dual-zone climate control system is turned on, it will be turned off automatically.