JDS Uniphase OLP-85, User Manual

Page: 68 / 88

68 OLP-85
9 R
EMOTE
C
ONTROL
C
OMMANDS
Results for the Powermeter application
:STOR:RD:IMG:LOW?
<STRING>,
<STRING>,
<STRING>
Returns the contents of a *.lm.jpg (“lm.jpg” = “low magnification.jpg”)
file specified by group (string1), fiber identifier (string2), and internal
identifier (string3).
Special format: “#h:14823,696e7072cdcc”
:STOR:RD:IMG:LOW
:OVRL?
<STRING>,
<STRING>,
<STRING>
Returns the contents of a *.tlm.jpg (“tlm.jpg” = “test low
magnification.jpg”) file specified by group (string1), fiber identifier
(string2), and internal identifier (string3).
Special format: “#h:16100,696e7072cdcc”
:STOR:WR
<STRING>,
<STRING>
Writes a dedicated measurement result specified by group (string1)
and fiber identifier (string2). If the given group doesn’t exist, it will be
created.
This command can take a few seconds to complete. Wait until
“:STOR:WR:BUSY?” returns 0 before proceeding.
This command creates up to seven files for up to seven components of
the result. The seven “:STOR:RD...?” queries are used to read these result
files.
To create unique file names, this function automatically adds an internal
index.
Command string Parameter type / Response type / Unit / Info
Command string Parameter type / Response type / Unit / Info
:POW? Get the measured power level without a level unit.
(Level unit dB, dBm or Watts depends on :SENS:POW:UNIT and
:SENS:MEAS:MODE)
:POW:DB? Get the measured power without a level unit.
(Level unit is always dB)
:POW:DBM? Get the measured power level without a level unit.
(Level unit is always dBm)
:POW:THRS:EVAL? Returns the result of the pass/fail evaluation of the currently selected
wavelength.
Response type:
<NR1>
0 (PASS)
1 (FAIL)
:POW:WATT? Get the measured power level without a level unit.
(Level unit is always Watts)
:TONE? The detected tone frequency.
:WLEN:AUTO? This result contains the result of the Auto
λ
measurement.