OLP-85
33
C
ONFIGURING
THE
D
IGITAL
P
ROBE
5 P
ROBE
/PCM O
PERATION
►
Press the
[
A
]
key, and then the
[
Overlay
]
button to change the
overlay view. Repeat the action until the desired view appears.
Three views can be displayed: without overlay, with colored
edges, and colored edges with a legend.
Overlay
A summary of test results is displayed at the upper right of the
screen.
Zone A: represents the core zone: it is
the area surrounding the core
Zone B: represents the cladding zone. It
surrounds the majority of the fiber
cladding.
Zone C: represents the epoxy ring.
Zone D: represents the ferrule zone: it
identifies a portion of the ferrule near
and around the fiber.
Notes:
To return to a Live image, press the QuickCapture™ key
or press the
[
A
]
key and tap the
[
Live
]
button to view
both the live image and a test result simultaneously.
If the test has been passed, the image has a green colored
frame. If failed, the frame is red.
Fig. 3.11 Pass/Fail analysis – overlay view
Magnification Control
The Magnification Control allows you to modify the live display
from high to low magnification and vice-versa. In the high
magnification mode an automatic centering is available.
Zone C
Zone B
Zone A
Zone D
Summary of Contents for OLP-85
Page 1: ......
Page 88: ...88 OLP 85 ROHS...
