14
21-18RT
Instruction & User Manual
OPERATING INSTRUCTIONS
Intended Use
This router is intended for the trimming/routing
of wood, plastic and similar materials.
The power tool must not be modified or used
for any other purposes than the ones described
in these instructions.
Power Switch Operation
m
To power on the tool, first press the LOCK/
UNLOCK button (1) to set the tool into
STANDBY MODE. Then press the START/
STOP button (2) to start the tool while in
STANDBY MODE.
m
To stop the tool, press the START/STOP
button (2) again and the tool will stop and
return to STANDBY MODE. To completely
power down the tool press the LOCK/
UNLOCK button (1) again.
LED Tasklight Illumination (6)
m
CAUTION! To avoid the risk of eye
damage, do not look directly at the
twin LED light sources!
m
To power on the LED tasklights (6), press
the LOCK/UNLOCK button (1) once.
m
To power off the LED tasklights, press the
LOCK/UNLOCK button again.
Prior to any assembly, adjustment or cleaning
operations, always disconnect the power
tool either from the power supply or
remove the battery as appropriate.
WARNING!
The tool can also be stopped and completely
powered down while in operation simply by
pressing the LOCK/UNLOCK button.
NOTE
If the charge status of battery pack fitted
to the tool is extremely low then the tool
will not power on. Replace the low charge
battery pack with a fully charged item.
NOTE
If the tool remains in STANDBY MODE for
greater than 1 minute without any further
operation then the tool will automatically
power down and the LED’S will extinguish.
NOTE
2886 21-18RT 2886 21-18RT Brushless Router and Accessories Manual.indd 14
2886 21-18RT 2886 21-18RT Brushless Router and Accessories Manual.indd 14
13/09/2021 10:15
13/09/2021 10:15