29
21-18RT
Instruction & User Manual
Using the trimmer guide
m
Optional accessory
m
The trimmer guide allows for trimming the
curved side like veneers for furniture by
moving the guide roller along the side of the
workpiece.
1. Loosen the clamp screw, then install the trimmer
guide on the trimmer base, and then tighten the
clamp screw.
2. Loosen the clamp screw and adjust the distance
between the trimmer bit and the trimmer guide
by turning the adjusting screw (1 mm per turn). At
the desired distance, tighten the clamp screw to
secure the trimmer guide.
3. Move the tool with the guide roller riding the side
of the workpiece.
Using the tool with the tilt base
m
The tilt base is convenient for chamfering.
Loosen the wing screws, then tilt the tool at the
desired angle, and then tighten the wing screws.
m
Firmly clamp a straight board to the workpiece
and use it as a guide against the tilt base. Feed
the tool in the direction of the arrow.
2886 21-18RT 2886 21-18RT Brushless Router and Accessories Manual.indd 29
2886 21-18RT 2886 21-18RT Brushless Router and Accessories Manual.indd 29
13/09/2021 10:16
13/09/2021 10:16