19
21-18RT
Instruction & User Manual
Adjusting cutting depth with the
plunge base
m
Optional accessory
1. Place the tool on the flat surface.
2. Select the stopper screw by rotating the stopper
base.
3. Loosen the stopper pole fixing nut, then pull up
the stopper pole while pressing the feed button.
4. Push down the tool until the tip of the trimmer bit
touches the flat surface, and then turn the fixing
lever to secure the tool.
5. Press down the stopper pole while pressing the
feed button until it contacts the stopper screw.
6. Slide the depth pointer so that the pointer
indicates “0” on the scale.
2886 21-18RT 2886 21-18RT Brushless Router and Accessories Manual.indd 19
2886 21-18RT 2886 21-18RT Brushless Router and Accessories Manual.indd 19
13/09/2021 10:16
13/09/2021 10:16
