28
21-18RT
Instruction & User Manual
The actual cut size on the workpiece is
slightly different from the templet. The
difference is the distance (X) between the
trimmer bit and the outside of the templet
guide. The distance (X) can be calculated by
using the following equation: Distance (X) =
(outside diameter of templet guide - trimmer
bit diameter) / 2
NOTE
m
Align the center hole in the straight guide
with the center of the circle to be cut.
Drive a nail less than 6 mmin diameter
into the center hole to secure the straight
guide. Pivot the tool around the nail in the
clockwise direction.
Using the templet guide
m
Optional accessory
m
The templet guide allows for repetitive cut
with templet patterns by using a templet.
1. Loosen the screws on the base plate, and then
remove the base plate from the trimmer base.
2. Place the templet guide on the base, and then
attach the base plate by tightening the screws.
3. Place the tool on the templet and move the tool
with the templet guide sliding along the side of the
templet.
4. Outside diameter of templet guide
2886 21-18RT 2886 21-18RT Brushless Router and Accessories Manual.indd 28
2886 21-18RT 2886 21-18RT Brushless Router and Accessories Manual.indd 28
13/09/2021 10:16
13/09/2021 10:16
