32
21-18RT
Instruction & User Manual
2. Operate the tool in the same way as the templet
guide for the trimmer base.
Using the parallel ruler
m
The parallel ruler is effectively used for
straight cuts when chamfering or grooving.
Adjust the distance between the bit and
the parallel ruler. At the desired distance,
tighten the wing bolts to secure the parallel
ruler. When cutting, move the tool with
the parallel ruler flush with the side of the
workpiece.
m
If the distance (A) between the side of the
workpiece and the cutting position is too
wide for the parallel ruler,or if the side of the
workpiece is not straight, the parallel ruler
cannot be used. In this case, firmly clamp a
straight board to the workpiece and use it
as a guide against the plunge base. Feed the
tool in the direction of the arrow.
Changing knob type grip to bar
type grip
m
To install the bar type grip on the plunge
base, loosen the screw of the knob type
grip, then remove the knob type grip, and
then install the bar type grip by tightening it.
2886 21-18RT 2886 21-18RT Brushless Router and Accessories Manual.indd 32
2886 21-18RT 2886 21-18RT Brushless Router and Accessories Manual.indd 32
13/09/2021 10:16
13/09/2021 10:16