• The contents of this manual may be changed without prior
notification.
• Please install an appropriate protective circuit on the
outside if malfunction or an incorrect operation may be
a cause of leading to a serious accident.
• This product doesn't have power switch so it should be
installed separately outside.
• Prior to using this product, accordingly the capacity of
required purpose should be considered.
• To prevent electric shock or malfunction of product,
do not supply the power until the wiring is completed.
• Please do not dissemble, manufacture, reform and reparir
this equipment. It leads to abnormality of movement,
electric shock, and fire.
• Do not use this product which required flammable and
explosive gas in an area.
• To prevent electric shock or malfunction of product, do not
supply the power until the wiring is completed.
• Please turn off the power when mounting / dismounting of
the product. This is a cause of electric shock, malfunction, or failure.
• To prevent defection or malfunction of this product,
supply proper power voltage in accordance with the rating.
• Please use this product after installing in the panel to
prevent electrical shock.
Warning
• Do not touch or contact the input terminals because they cause electric shock.
Danger
• Please use this product within 100 % of the rated output to
prevent damage or trouble.
• This product should be used on only the indicated rated input
voltage.
• The capacity of the voltage and current is depending on the
type of the wiring cable so this product should be connected
in an appropriate connectable wire.
• The ground terminal must be installed on to prevent
electric shock or electromagnetic wave.
• Foreign materials can be damage or malfunction in case of
entering into the product.
• Blowing fuse in inside of the product can cause chain damage or
malfunction to the other parts. Thus, repair should be required
promptly.
• This product has a certain level of leakage current. So it should
be used with extreme caution when using multiple units in
parallel because the sum of the leakage current is larger value.
• Please be cautious in high voltage in inside of the product to
prevent electrical shock.
• Please do not use it at the following locations for the safety
and reliability of the product.
· Easy to reach to water and fire place
· High ambient temperature and non-ventilated place
· Lots of debris materials and dust place
· Volatile and flammable substances place
· High humid place
· lots of vibration and shock place
Caution
Model
Code
Information
TPS-
□ □ □
TPS Power supply (Enclosed Type)
Power output 15
15W, 30W, 50W, 75W, 100W, 150W, 220W, 350W, 450W
Number of
output voltage
S
1 output
Output voltage
classification
5
5 VDC (220W, 350W, 450W are excluded)
12
12 VDC
15
15 VDC (350W, 450W are excluded)
24
24 VDC
48
48 VDC (15W, 30W, 50W, 75W, 100W, 150W, 220W are excluded)
The product’s input voltage is set at 220 VAC 50 - 60 Hz when shipping it out from our company.
Free power supply product works in 100 - 240 VAC 50 - 60 Hz even though it does not select input voltage.
■ Instant maximum output power
The product's instant maximum output voltage can work up to rating's 130 % (220 VAC input Standard)
■ Adjustable Output voltage
Output voltage can be adjustable by adjustable resistance inside of the product. (more than ±5 % of rated output voltage)
■ Limited Inrush Current
This product has inrush current limit circuit but it should be considered carefully when selection of the external switch or fuse.
■ Short-Circuit Protection
When the output terminals shorted, the output is blocked. After eliminating the reason of short, voltage is output automatically.
■ Over-Voltage Protection
When the output voltage is reached at 115 to 140 % of the rated voltage. Blocking the current flow to protect the outside of
the connected equipment and system.
■ Over-Current Protection
When the output current exceeds the rated capacity, activate this protection to stop output.
After eliminating the reason of over-current, the output voltage is restored automatically.
■ Over-Temperature Protection
When PWM controller junction temperature reaches to 135 ~ 140 ℃, this protection
automatically stops switching to prevent components damage due to overheating.
■ Ripple Noise
Wiring should be shortened to reduce induction noise. Please use after reducing ripples noise sufficiently.
Input
voltage
Free voltage 100 - 240 VAC 50 - 60Hz
Manual-select input
100 - 120 / 200 - 240 VAC 50 - 60Hz
TPS
series
TPS-15S, TPS-30S, TPS-50S,TPS-75S, TPS-450S
TPS-100S, TPS-150S, TPS-220S, TPS-350S
▍Suffix code
▍Function
█ Rated input voltage
▍Dimension
▍Safety information
Please read the safety information carefully before the use, and use the product correctly.
The alerts declared in the manual are classified into
Danger
and
Warning
according to their importance.
DANGER
Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury
WARNING
Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury
CAUTION
Indicates a potentially hazardous situation which, if not avoided, may result in minor injury or properties damage
Power supply (SMPS)
TPS
Thank you for purchasing Hanyoung Nux products. Please read the instruction
manual carefully before using this product, and use the product correctly.
Also, please keep this instruction manual where you can view it any time.
INSTRUCTION MANUAL
28, Gilpa-ro 71beon-gil, Michuhol-gu,
Incheon, Korea TEL : +82-32-876-4697
http://www.hynux.com
HANYOUNGNUX CO.,LTD
Jl. Jangari RT.003/002 Hegarmanah Sukaluyu
Cianjur Jawa Barat Indonesia 43284
TEL : +62-21-5060-7210
PT. HANYOUNG ELECTRONIC INDONESIA
▍Derating curve
▍Block diagram
100
LOAD
(%)
Input voltage (VAC) 60 Hz
Ta=25 ℃
80
60
40
20
0
100
80
60
40
20
0
90 100 110 120 180 220 240 264
LOAD
(%)
Ambient temperature (℃)
-20 -10 0 10 20 30 40 50 60
12 - 24 V
5 V
100
LOAD
(%)
Input voltage (VAC) 60 Hz
Ta=25 ℃
80
60
40
20
0
100
80
60
40
20
0
90 100 110 120 180 220 240 264
LOAD
(%)
Ambient temperature (℃)
-20 -10 0 10 20 30 40 50 60
12 - 24 V
5 V
• L(Live)/N(Neutral) : AC input Terminal.
• F.G(Frame Ground) : As an earth terminal, it is used to protect electric shock accident and
improve the electromagnetic interference.
• (+) / (-) : It is a DC output terminal.
Please pay a careful polarity on connecting
※ When output of GND is mutually short circuited, output of terminals would be short circuited each other.
※ Please make sure to ask us when you have any question before using the product.
※ Please make sure to check about the terminal’s existence and connection method
because they are different depending on the types of model.
▍Product's wiring
█ Input terminal
█ Output terminal
MH0201KE190624
INPUT
EMI NOISE
FILTER
INRUSH
CURRENT
LIMITING
F.G
RECTIFIER
& FILTER
SNUBBER
CIRCUIT
PWM
CONTROLLER
O. C. P
O. T. P
TRANSFORMER
RECTIFIER
& FILTER
+V
-V
PHOTO
COUPLER
VOLTAGE
DETECTION
O. V. P
2-M3 Fixing hole
2-M3
Fixing hole
85.0
5.0
5.0
27.5
31.6
64.1
7.5
97.5
50.0
60.5
20.5
97.6
16.6
18.6
29.0
31.0
32.0
16.0
7.6
6.6
3-M3 Fixing hole
2-M3 Fixing hole
4.0
4.0
10.0
10.0
7.5
103.6
97.7
13.3
5.0
5.0
36.0
42.0
83.0
20.0
90.0
125.0
15.0
38.8
20.0
39.8
72.0
6.0
7.6
6.6
2-M3 Fixing hole
2-M3
Fixing hole
86.6
4.0
7.4 5.0
79.0
24.0
65.0
68.0
98.0
20.0
98.0
9.0
10.0
36.0
37.0
20.0
7.6
28.0
46.0
6.6
3-M3 Fixing hole
2-M3 Fixing hole
4-M4 X L8 Fixing hole
2-M4 X L8 Fixing hole
3-M4 X L8 Fixing hole
3-M4 X L8 Fixing hole
7.6
7.6
48.0
48.0
19.0
40.2
96.0
6.6
6.6
7.6
6.6
22.5
4.5
25.0 50.0
37.5
45.0
93.0
6.0
14.0
20.0
90.0
25.0
109.0
135.0
12.0
10.0
10.0
10.0
10.0
100.5
72.5
5.75
125.0
125.0
100.5
79.5
40.0
50.0
93.0
199.0
20.0
189.0
5.75
4.5
25.0
25.0
65.0
16.0
2-M3 Fixing hole
2-M3
Fixing hole
85.0
5.0
5.0
27.5
31.6
64.1
7.5
97.5
50.0
60.5
20.5
97.6
16.6
18.6
29.0
31.0
32.0
16.0
7.6
6.6
3-M3 Fixing hole
2-M3 Fixing hole
4.0
4.0
10.0
10.0
7.5
103.6
97.7
13.3
5.0
5.0
36.0
42.0
83.0
20.0
90.0
125.0
15.0
38.8
20.0
39.8
72.0
6.0
7.6
6.6
2-M3 Fixing hole
2-M3
Fixing hole
86.6
4.0
7.4 5.0
79.0
24.0
65.0
68.0
98.0
20.0
98.0
9.0
10.0
36.0
37.0
20.0
7.6
28.0
46.0
6.6
3-M3 Fixing hole
2-M3 Fixing hole
4-M4 X L8 Fixing hole
2-M4 X L8 Fixing hole
3-M4 X L8 Fixing hole
3-M4 X L8 Fixing hole
7.6
7.6
48.0
48.0
19.0
40.2
96.0
6.6
6.6
7.6
6.6
22.5
4.5
25.0 50.0
37.5
45.0
93.0
6.0
14.0
20.0
90.0
25.0
109.0
135.0
12.0
10.0
10.0
10.0
10.0
100.5
72.5
5.75
125.0
125.0
100.5
79.5
40.0
50.0
93.0
199.0
20.0
189.0
5.75
4.5
25.0
25.0
65.0
16.0
2-M3 Fixing hole
2-M3
Fixing hole
85.0
5.0
5.0
27.5
31.6
64.1
7.5
97.5
50.0
60.5
20.5
97.6
16.6
18.6
29.0
31.0
32.0
16.0
7.6
6.6
3-M3 Fixing hole
2-M3 Fixing hole
4.0
4.0
10.0
10.0
7.5
103.6
97.7
13.3
5.0
5.0
36.0
42.0
83.0
20.0
90.0
125.0
15.0
38.8
20.0
39.8
72.0
6.0
7.6
6.6
2-M3 Fixing hole
2-M3
Fixing hole
86.6
4.0
7.4 5.0
79.0
24.0
65.0
68.0
98.0
20.0
98.0
9.0
10.0
36.0
37.0
20.0
7.6
28.0
46.0
6.6
3-M3 Fixing hole
2-M3 Fixing hole
4-M4 X L8 Fixing hole
2-M4 X L8 Fixing hole
3-M4 X L8 Fixing hole
3-M4 X L8 Fixing hole
7.6
7.6
48.0
48.0
19.0
40.2
96.0
6.6
6.6
7.6
6.6
22.5
4.5
25.0 50.0
37.5
45.0
93.0
6.0
14.0
20.0
90.0
25.0
109.0
135.0
12.0
10.0
10.0
10.0
10.0
100.5
72.5
5.75
125.0
125.0
100.5
79.5
40.0
50.0
93.0
199.0
20.0
189.0
5.75
4.5
25.0
25.0
65.0
16.0
2-M3 Fixing hole
2-M3
Fixing hole
85.0
5.0
5.0
27.5
31.6
64.1
7.5
97.5
50.0
60.5
20.5
97.6
16.6
18.6
29.0
31.0
32.0
16.0
7.6
6.6
3-M3 Fixing hole
2-M3 Fixing hole
4.0
4.0
10.0
10.0
7.5
103.6
97.7
13.3
5.0
5.0
36.0
42.0
83.0
20.0
90.0
125.0
15.0
38.8
20.0
39.8
72.0
6.0
7.6
6.6
2-M3 Fixing hole
2-M3
Fixing hole
86.6
4.0
7.4 5.0
79.0
24.0
65.0
68.0
98.0
20.0
98.0
9.0
10.0
36.0
37.0
20.0
7.6
28.0
46.0
6.6
3-M3 Fixing hole
2-M3 Fixing hole
4-M4 X L8 Fixing hole
2-M4 X L8 Fixing hole
3-M4 X L8 Fixing hole
3-M4 X L8 Fixing hole
7.6
7.6
48.0
48.0
19.0
40.2
96.0
6.6
6.6
7.6
6.6
22.5
4.5
25.0 50.0
37.5
45.0
93.0
6.0
14.0
20.0
90.0
25.0
109.0
135.0
12.0
10.0
10.0
10.0
10.0
100.5
72.5
5.75
125.0
125.0
100.5
79.5
40.0
50.0
93.0
199.0
20.0
189.0
5.75
4.5
25.0
25.0
65.0
16.0
2-M3 Fixing hole
2-M3
Fixing hole
85.0
5.0
5.0
27.5
31.6
64.1
7.5
97.5
50.0
60.5
20.5
97.6
16.6
18.6
29.0
31.0
32.0
16.0
7.6
6.6
3-M3 Fixing hole
2-M3 Fixing hole
4.0
4.0
10.0
10.0
7.5
103.6
97.7
13.3
5.0
5.0
36.0
42.0
83.0
20.0
90.0
125.0
15.0
38.8
20.0
39.8
72.0
6.0
7.6
6.6
2-M3 Fixing hole
2-M3
Fixing hole
86.6
4.0
7.4 5.0
79.0
24.0
65.0
68.0
98.0
20.0
98.0
9.0
10.0
36.0
37.0
20.0
7.6
28.0
46.0
6.6
3-M3 Fixing hole
2-M3 Fixing hole
4-M4 X L8 Fixing hole
2-M4 X L8 Fixing hole
3-M4 X L8 Fixing hole
3-M4 X L8 Fixing hole
7.6
7.6
48.0
48.0
19.0
40.2
96.0
6.6
6.6
7.6
6.6
22.5
4.5
25.0 50.0
37.5
45.0
93.0
6.0
14.0
20.0
90.0
25.0
109.0
135.0
12.0
10.0
10.0
10.0
10.0
100.5
72.5
5.75
125.0
125.0
100.5
79.5
40.0
50.0
93.0
199.0
20.0
189.0
5.75
4.5
25.0
25.0
65.0
16.0
TPS-350S/450S_외형도
50.0
115.0
88.5
5.0
15.0
9.5
8.3
215.0
17.4
17.1
4-M4 X L8 Fixing hole
60.0
133.0
41.0
4-M4 X L8 Fixing hole
20.0
15.0
133.0
41.0
█ TPS-100S
█ TPS-150S / 220S
█ TPS-350S / 450S
█ TPS-50S / TPS-75S
█ TPS-30S
█ TPS-15S
