8
SAFETY INSTRUCTION
RF Declaration
Equipment that complies with directive 2014/30/EU concerning electromagnetic compatibility (EMC)
and the technical requirements of EN60974
-
10 is designed for use in industrial buildings and not those
for domestic use where electricity is provided via the low voltage public distribution system.
Difficulties may arise in assuring class A electromagnetic compatibility for systems installed in domestic
locations due to conducted and radiated emissions.
In the case of electromagnetic problems, it is the responsibility of the user to resolve the situation.
It may be necessary to shield the equipment and fit suitable filters on the mains supply.
LF Declaration
Consult the data plate on the equipment for the power supply requirements.
Due to the elevated absorbance of the primary current from the power supply network, high power
systems affect the quality of power provided by the network. Consequently, connection restrictions or
maximum impedance requirements permitted by the network at the public network connection point
must be applied to these systems.
In this case, the installer or the user is responsible for ensuring the equipment can be connected,
consulting the electricity provider if necessary.
Materials and their disposal
Welding equipment is manufactured with BSI published standards meeting CE requirements materials
which do not contain any toxic or poisonous materials dangerous to the operator.
Do not dispose of the equipment with normal waste. The European Directive 2012/19/EU on Waste
Electrical and Electronic Equipment states the electrical equipment that has reached its end of life must
be collected separately and returned to an environmentally compatible recycling facility for disposal.
For more detailed information please refer to the HSE website www.hse.gov.uk