43
EC Declaration of Conformity
The manufacturer, or its legal representative supplier in the European Community Jasic, declares that the
equipment described below is designed and produced according to following EU
-
Directives:
-
Low Voltage Directive No: 2014/35/EU
-
EMC Directive No: 2014/30/EU with their amendments
Inspected according to following EU
-
Norms:
-
EN 60 974
-
1
-
EN 60 974
-
10
Type:
Jasic MIG 200CS
Any alteration or change to these machines by any unauthorized person makes this declaration invalid.
WEEE disposal
The equipment is manufactured with materials which do not contain any toxic or poisonous materials
dangerous to the operator.
When the equipment is scrapped, it should be dismantled separating components according to the type
of materials.
Do not dispose of the equipment with normal waste. The European Directive 2002/96/EC on Waste
Electrical and Electronic Equipment states the electrical equipment that has reached its end of life must
be collected separately and returned to an environmentally compatible recycling facility.
Jasic has a relevant recycling system which is compliant and registered in the UK with the environment
agency. Our registration reference is WEEMM3813AA.
In order to comply with WEEE regulations outside the UK you should contact your supplier.
RoHS Compliance Declaration
We herewith confirm, that the above mentioned product does not contain any of the restricted
substances as listed in EU Directive 2011/65/EC in concentrations above the limits as specified therein.
Disclaimer:
Please note that this confirmation is given to the best of our present knowledge and belief.
Nothing herein represents and/or may be interpreted as warranty within the meaning of the applicable
warranty law.