14
CONTROLS
Welding mode function switch explained Jasic MIG 200CS
The welding mode dial is a 7 position switch which allows the users to select the different weld processes.
1.
MMA
-
MMA welding process position
2.
TIG
-
Lift TIG welding process position
3.
MIG
-
Standard MIG welding process position
Synergic MIG Mode:
4.
C0² / 0.8
-
In this position you have entered synergic MIG mode for 0.8mm dia welding wire when
being used with C0² gas
5.
C0² / 1.0
-
In this position you have entered synergic MIG mode for 1.0mm dia welding wire when
being used with C0² gas
5.
98% Ar + 2% C0² / 0.8
-
In this position you have entered synergic MIG mode for 0.8mm dia welding
wire when being used with gas mixture of 98% Argon and 2% C0²
6.
98% Ar + 2% C0² / 1.0
-
In this position you have entered synergic MIG mode for 1.0mm dia welding
wire when being used with gas mixture of 98% Argon and 2% C0²
The inbuilt synergic control is used in this Jasic MIG 200CS in which the voltage is adjusted in relation to
the wire feed speed, so when in synergic mode the volts and wire feed speed are linked and altering the
wire feed speed dial will alter each characteristic in
-
keeping with the welding curve.
Adjusting the voltage dial will trim the voltage but also adjust the wire feed speed accordingly.
3 4 5
2
6
1
7
