17
LCD SCREEN ICON FUNCTION DESCRIPTIONS
The control panel images (on page 15) are examples of screen modes you will come across during normal
use of the Jasic EM
-
200CT TFT
-
LCD machine and the below and following pages offer a brief explanation
for the icons used.
Item No
Icon
Icon Name
Description
10
-
-
Function
Description
English by default. This area displays and explains the current
selected operation which is normally highlighted in green.
No Wireless
Connection
This wireless icon is displayed when no wireless remote control
device is connected to the machine.
11
Wireless
Connection
Icon
The "Pairing successful" icon will be displayed when a wireless
remote control device has been connected to the machine.
12
-
-
Welding
voltage and
arc length
data area
When in Synergic MIG welding mode, using the right rotary dial
will increase or decrease the welding voltage and due to the
characteristics of synergic, the arc length will increase or
decrease accordingly, this will also be noted with the progress
bar as this will adjust proportionally with the voltage preset
value. See also item 16.
13
-
-
Bottom
Icon Bar
This multiple icon bar shows the operator a quick view of the
‘background’ set parameters, as per example shown on page 15
for Synergic MIG (from left to right) parameters are set as
follows: Welding wire size, 2T trigger mode, welding inductance
value, pre gas time, post gas time and burn back voltage.
The icons shown will change depending on which welding mode
is selected and the parameter choice settings.
14
Back Button
Pressing the back button will take you to the previous screen or
previous menu.
15
Control
Button
The control button function is activated by pressing the front
face of the central control dial which ‘enters’ or acknowledges
the selected function on the screen.
16
Lower Right
Rotary
Encoder
Rotating the left lower control dial clockwise or anti
-
clockwise
allows the user to increase or decrease welding voltage and
stick out in Synergic MIG mode and welding voltage in standard
MIG mode, see item 12.
17
-
-
Top Icon Bar
Function
settings
This multiple icon bar will show various secondary icon/options
when you select and enter Parameter Settings (P) options.
This option parameter area will show in any of the welding
modes when ‘P’ secondary parameters options is selected,
where the user can adjusted and set. Example of available
parameter are : Material thickness, wire size, pre/post gas,
trigger mode, MMA and Lift TIG settings etc.
Please also refer to section 7 on page 16 for further detail on
the parameter available. ** See following page for full list **
