25
NAVIGATING THE ‘LCD’ CONTROL PANEL
System Setting
-
Selection and Adjusting
Wireless Remote Control Option
As stated above the EVO range can also allow the user to use wireless technology for remote control
purposes that offers the user to use wireless hand or foot controls when using the machine in MMA,
Lift TIG or MIG welding modes.
Wireless Remote Control Pairing Procedure
To use a remote control wireless device, first you need to ensure that you have a fitted the wireless
receiver to your machine, see the wireless section of the EM
-
200CT / EM
-
250CT operating manual for
further details.
As per previous pages, to access wireless pairing from the home
screen, navigate and enter into System Settings and then enter
User Background settings and then scroll down to turn on wireless
pairing which will be highlighted green (as shown right).
Then press the control dial button to enter the wireless pairing
option screen.
•
At this point, ensure your remote wireless device is charged
and turned on
•
On accessing the pairing screen, the machine will
automatically start to scan for a wireless device
•
This is confirmed by the screen showing “Pairing, please wait”
•
Ensure that your remote device is in pairing mode (see
remote control instructions supplied with your device)
Once wireless pairing is successful the screen will display
connection confirmation by stating "Pairing successful !" and
the wireless connection indicator icon display the wireless icon
without a ‘x’ above it.
You will also note that the highlighted green bar has changed from
turn ‘on’ to turn ‘off’ wireless.
Once this task is completed either press the ‘back’ button or press
the ‘home’ button to continue to use the machine.
Disconnecting the wireless connection:
After a wireless remote control device was successfully paired,
disconnecting is similar to above.
There is 2 ways to disconnect the wireless device:
•
Press and hold the remote control device pairing key or
•
Access the machines wireless remote control pairing option
screen and press the control dial button on the highlighted
green “turn off wireless remote control pairing” tab.
Once the wireless device is disconnected the screen will show the
wireless ‘disconnected’ icon and the highlighted green tab will change to turn ‘on’ (as shown right).
Once this task is completed either press the ‘back’ button or press the ‘home’ button to continue to use
the machine.
