24
NAVIGATING THE ‘LCD’ CONTROL PANEL
System Setting
-
Selection and Adjusting
Slow Wire Feeding Speed Adjustment
To assist with the initial arcing of soft wires such as aluminium, you can introduce a slow start to the
feed wire speed, which will ’slope’ in the wire speed. Increasing or decreasing the initial wire feed start
changes the weld start characteristics.
Setting the ‘initial’ wire feed speed rate of MIG wire which can be set to either "0", "1", "2" or "3".
•
"0" indicates that the slow wire feed function is disabled.
•
"1" indicates that the slow wire feed speed is 1/3 of the current set speed, respectively.
•
"2" indicates that the slow wire feed speed is 1/2 of the current set speed, respectively.
•
"3" indicate that the slow wire feed speed is 2/3 of the current set speed, respectively.
Remote Control Selection
The EVO machine range of machines allow the user to use either wired or wireless technology for
remote control purposes that offers the user to use wired or wireless hand or foot controls when using
the machine in MMA, LIG TIG or MIG welding modes.
The remote selection control allows the user to select current control from either the front panel or to
be controlled remotely either via the 9 pin control socket or via the optional wireless control for MMA
and TIG remote control devices.
To enter the remote control mode function screen, rotate the control dial to select the control mode
icon (as shown right) and press control dial button to access this function.
Here you can select the remote control ON or OFF
option by rotating the control dial which will scroll
through either Wireless remote, Wired remote or
Local options.
Pressing the control dial button will confirm and save
your choice and return you to the previous screen.
