12
DESCRIPTION OF CONTROLS
-
JASIC MIG EM
-
200CT TFT
-
LCD
Front and Rear view Jasic MIG EM
-
200CT
1.
Digital user control panel (see lower down for further information)
2.
"+" Output terminal*, The connection
for the torch in MIG mode
3.
Wireless remote control (optional)
4.
Wired remote control 9 pin socket
5.
MIG torch outlet, The connection used to
connect the euro style MIG torch
6.
"
-
" Output terminal*, The connection for the
work return lead in MIG mode
7.
Front cooling grill
8.
Euro outlet trailing cable plug, this plug is used
to determine the polarity of the torch euro
outlet connector
9.
Carriage front wheels (lockable)
* Panel socket size is 35/50mm
Rear view Jasic MIG EM
-
200CT
10.
ON/OFF power switch
11.
Shielding gas inlet hose
12.
Machine mains power cable
13.
Rear panel with integrated cooling vents
14.
Rear support wheels
** Gas cylinder, gas regulator and gas flow meter
Front control panel view Jasic MIG EM
-
200CT
15.
Home Button: Pressing the home button will take you directly back to
the home screen (as shown in the display area image on page 13)
16.
The parameter control dial is also a control button which when pressed ‘confirms’ entry to another
screen option or the chosen parameter being set.
17.
Parameter adjustment dial A: The current/wire feed
speed dial and is used to adjust the welding current
in Synergic MIG or wire feed speed in Standard MIG.
18.
LCD screen: The 5” colour display area shows the
various welding mode options, the associated welding
parameter, error codes, user manual to the operator.
Upon turning the machine on and during machine boot
up the screen will show the Jasic logo.
19.
Return button: Pressing the return button takes
the user back to the previous screen or option.
20.
Parameter adjustment control dial: By rotating
this control dial allows the user to scroll through or
to make parameter changes that are shown via the display.
21.
Parameter adjustment dial B: The voltage/arc length
dial and is will be used to adjust the welding voltage or arc length in Synergic MIG or standard MIG.
