Jasic EVO 2.0 EM-200CT, Operator'S Manual

Page: 33 / 80

33
OPERATION - MIG
Before starting any welding activity ensure that you have suitable eye protection and
protective clothing. Also take the necessary steps to protect any persons within the welding
area.
MIG/MAG standard welding mode
Trigger Mode:
Select the 2T torch trigger mode by pressing the torch mode button (H) until the 2T icon is
Illuminated as shown right.
For alternative trigger modes details, please see page 37.
Standard MIG Torch or Spool Gun Mode:
The Jasic EM - 200CT and EM - 250CT machines can be used with the optional spool
gun part number JE - SP250 - 6 which is a Euro style spool gun which will connect to
the machine via the Euro outlet connector.
Pressing the MIG torch type button (J) to select either standard MIG torch or the
spool gun torch option depending on which is fitted.
The corresponding indicator will be lit according to your selection.
See page 45 for further information on spool gun use.
Wire Feed Speed Control
The control dial and display area (K) is a combined rotary encoder and selection push button which
when rotated in standard MIG mode gives the operator the ability to control wire feed speed.
Rotating the control dial clockwise increases wire feed speed (increasing welding current) while rotating
the dial anticlockwise will decrease the wire feed speed
ultimately reducing welding current.
(The wire feed speed range is 2 ~ 14 m/min).
MIG Voltage Control
The control dial and display area (L) is a combined rotary
encoder and selection push button which when rotated
in standard MIG mode gives the operator the ability to
control welding voltage.
Inductance and Burn Back Controls
In standard MIG the top dial (K) is only for controlling wire feed speed although the lower dial (L) will
control the following:
Welding Voltage (welding voltage adjustment range is 11 ~ 26V)
Inductance (Inductance adjustment range is – 10 ~ +10)
Burn Back Time (Burnback time adjustment range is 0 ~ 800ms)
To access inductance and burnback time, simply press the lower control dial (L) which will scroll you
through these 3 options. Please refer to page 19 for further information.
H
J
K
L