5 - 4
5.2.4.2. Setting for the configuration data
In this section, the internal configuration
data is set as same as actual
configuration of the radio.
After operating in Paragraph 5.2.1. as page 1, operate as follows:
Operation
Display
remarks
88
1
tr, t or tr
entering the setting for the configuration
data
Present data is displayed on the LED.
tr: transceiver
t : transmitter
r : receiver
1,2 or 3
tr, t, or r
select the actual configuration of the radio
switch 1: transceiver
switch 2: transmitter
switch 3: receiver
#
89
save and exit this setting
(for saving data to EEPROM)
or
＊
88
exit this setting
(for not saving data to EEPROM)
turn off the S2(dip sw)-4 on CDE-885
press the S1 on CDE-885
