5 - 3
5.2.4. Procedure for setting initial data on page1
5.2.4.1. Setting for memory channel data in memory channel mode
In this section, the method for setting the memory channel data is described
bellow, when the JRV-500B is set in memory channel mode.
After operating in Paragraph 5.2.1. as page 1, operate as follows:
Operation
Display
remarks
88
0
_ _
entering the setting for memory channel
data number
1
1
select the channel number defied on Radio
6
16
Regulation (example ch16)
#
_ _
channel number data is memorized and
required the memory channel number data
0
0
memory channel number data is inputted
(example 0)
0: memory channel 1
1: memory channel 2
2: memory channel 3
3: memory channel 4
4: memory channel 5
5: memory channel 6
6: memory channel 7
7: memory channel 8
#
89
save and exit this setting
(for saving data to EEPROM)
or
＊
88
exit this setting
(for not saving data to EEPROM)
turn off the S2(dip sw)-4 on CDE-885
press the S1 on CDE-885
