5 - 5
5.2.4.3. Setting for memory channel mode or direct channel mode
In this section, the memory channel mode or direct channel mode is selected
After operating in Paragraph 5.2.1. as page 1, operate as follows:
Operation
Display
remarks
88
2
0 or 1
Present data is displayed on the LED.
Select the operating mode
switch 0 : memory channel mode
switch 1 : direct channel mode
0 or 1
0 or 1
select the actual configuration of the radio
0: memory channel mode
1: direct channel mode
#
89
save and exit this setting
(for saving data to EEPROM)
or
＊
88
exit this setting
(for not saving data to EEPROM)
turn off the S2(dip sw)-4 on CDE-885
press the S1 on CDE-885
