3
HANDLE WITH CARE - DO's & DON'T's
FAILURE TO ADHERE TO THE ABOVE CONDITIONS WILL RESULT IN PERSONAL INJURY OR
PRODUCT DAMAGE NOT COVERED UNDER JANUS INTERNATIONAL PRODUCT WARRANTY.
ALWAYS HANDLE PRODUCT WITH CARE, AND REVIEW ALL INSTRUCTIONS, WARNINGS, AND
NOTES BEFORE INSTALLING PRODUCT.
REVIEW DOOR ASSEMBLY AND GENERAL PARTS DESCRIPTIONS BILL OF MATERIAL FROM PAGE
4, FIGURE 1 TO FAMILIARIZE YOURSELF WITH COMMON PARTS OF ROLLING SHEET DOOR
ASSEMBLY.
DOOR ASSEMBLIES ARE MANUFACTURED PER OPENING WIDTHS AND HEIGHTS SPECIFIED AT
TIME OF ORDER. JANUS INTERNATIONAL WILL NOT BE HELD RESPONSIBLE FOR OPENING
WIDTHS OR HEIGHTS THAT DO NOT MATCH THOSE SPECIFIED AT TIME OF ORDER.
DON'T's
•
DO NOT - STAND ON PRODUCT.
•
DO NOT - CLIMB ON PRODUCT.
•
DO NOT - WALK ON PRODUCT.
•
DO NOT - DROP PRODUCT.
•
DO NOT - SLIDE PRODUCT ACROSS ANY SURFACE.
•
DO NOT - THROW OR TOSS PRODUCT.
•
DO NOT - SET OR STACK PRODUCT ON GRAVEL,
DEBRIS, OR UNEVEN SURFACES.
•
DO NOT - ALLOW SHARP OBJECTS TO COME IN
CONTACT WITH PRODUCT.
•
DO NOT - LEAVE PRODUCT UNSECURED WHILE IN
TRANSIT OR DURING INSTALLATION.
DO's
•
CAREFULLY INSPECT ALL PRODUCT FOR
DAMAGE UPON RECEIPT.
•
USE PROTECTIVE FOAM BETWEEN
PRODUCT AND ANY SURFACE OR OBJECT IT
MAY COME INTO CONTACT WITH WHILE IN
TRANSIT AND/OR STORAGE.
•
WHEN SECURING PRODUCT FOR TRANSIT,
USE FOAM BARRIER BETWEEN PRODUCT
AND STRAPS, ROPES, ETC.
•
CAREFULLY UNLOAD PRODUCT FROM ANY
TYPE OF CRATING MATERIAL ASSURING NO
CONTACT WITH FASTENERS OR SHARP
EDGES.
•
CLEAR FLOOR AT OPENING OF ALL DEBRIS
BEFORE INSTALLING PRODUCT.
•
SINGLE PERSON LIFTING OF PRODUCT
COULD CAUSE INJURY. USE ASSISTANCE
WHEN MOVING OR LIFTING.
•
INSTALL PRODUCT WITH APPROPRIATE
LIFTING EQUIPMENT ASSURING A
PROTECTIVE BARRIER IS MAINTAINED
BETWEEN PRODUCT AND ANY SURFACE OR
OBJECT IT MAY COME INTO