Janome Quilt Maker Pro 20, User Manual

Page: 61 / 78

61
www.janome.com
User Manual
QUILT MAKER PRO 20
Alarms
The alarm settings enable you to quickly turn on or off the alarms for the low bobbin, thread breaks, and
over-speed.
Low-bobbin alarm: Alerts you when the low-bobbin threshold has been reached, indicating you will soon
run out of bobbin thread. For more information about the low-bobbin alarm, see Low-Bobbin Alarm above.
Thread-break alarm: Alerts you if the top thread breaks while quilting.
Over-speed alarm: Alerts you if you are moving the machine faster than 100% of motor capacity and
therefore are quilting too fast for stitch regulation to work properly. Because of the high speeds that the
QMP 20 can handle, you will most likely never encounter this alarm.
Configure Alarms
Low Bobbin Alarm
Thread-Break Alarm
Over-Speed Alarm
To turn on or off alarms
• Touch the bell button next to the alarm to turn it on or off. It is on when it appears blue with the
sound-wave symbols. It is off when it gray.
Gray indicates the
alarm is off, blue
alarm is on. Touch
to toggle between
on and off.