www.janitza.de
71
UMG 96-PA / UMG 96-PA-MID / UMG 96-PA-MID+
14. UMG 96-PA-MID / UMG 96-PA-MID+
Fig.
Rear view of the device with terminal covers, lead seal
mechanisms and the mechanism for the silicone seal.
Fig.
Installation of the terminal covers on the device
Lead seal
mechanisms
Mechanism for
silicone seal
The
UMG 96-PA-MID and the UMG 96-PA-
MID+
are certified according to the Measuring
Instruments Directive (MID) and differ from the
UMG 96-PA in terms of installation and operation.
Further information on the MID Measuring Instru-
ments Directive can be found at
mid-measuring-instruments-directive.html
14.1 Intended use
The
UMG 96-PA-MID/MID+
is to be used in
accordance with national specifications. The
period of validity of the calibration depends on the
applicable national law.
Before using the device, find out about national
regulations and current directives for electronic
meters and about the calibration validity period
and how it can be extended.
NOTE
UMG 96-PA-MID/MID+:
·Use calibrated transformers when the device is
to be used for billing purposes.
14.2 Mounting
NOTE
UMG 96-PA-MID/MID+:
For a tamper-proof
installation (MID-compliant), install
·The silicone seal (in scope of delivery) between
the device and the installation opening in the
protected switchboard cabinet.
·After installation (see from section7 on page
21), install the terminal covers (in scope of
delivery) and seal them with lead seals on the
mechanisms provided for this purpose.
Fig.
Device front of the UMG 96-PA
MID
