www.janitza.de
47
UMG 96-PA / UMG 96-PA-MID / UMG 96-PA-MID+
Modbus
address
Measured value
19026
Active power, sum L1-L3, instantaneous value
19042
Reactive power, sum L1-L3, instantaneous
value
19012
Current L1, instantaneous value
19014
Current L2, instantaneous value
19016
Current L3, instantaneous value
1050
Cos phi sum L1-L3, instantaneous value
For measurement devices with RCM module
20053
Neutral conductor current I4, instantaneous
value
20055
Residual current RCM 1 (I5), instantaneous
value
20057
Residual current RCM 2 (I6), instantaneous
value
20061
Temperature, instantaneous value
Table of frequently used measured values
Frequently used measured values and their Mod-
bus addresses for output on the
analog output
(Modbus address 30001)
:
NOTE
A continuation of the table can be found in section
„20.1 Modbus addresses of frequently used mea-
You can access the Modbus editor as follows:
·Open the
Configuration
window as previously
described.
·Use buttons 3 (
) and 4 (
) to select the item
Modbus editor
and confirm with button 6 (
Enter
).
Fig.
Configuration window, Modbus editor
·The
Communication
window appears with the
Modbus editor.
·Use buttons 3 (
) and 4 (
) to select the item
Address
or
Value
and confirm with button 6
(
Enter
).
·The selected item is shown "yellow".
·Use buttons 2 (
) and 5 (
) to change the
position of the digit to be set for each item and
use buttons 3 (
) and 4 (
) to change the digit
(-1/+1).
·Confirm your entries with button 6 (
Enter
) or end
the action by pressing button 1 (
Esc
).
·To return to the measuring display
Home
, press
button 1 twice (
Esc
) and then press button 2
(
Home
).
Fig.
Configuration window, Modbus editor
