janitza 96-PA-RCM, User Manual

Page: 56 / 58

Module 96-PA-RCM / 96-PA-RCM-EL www.janitza.de
56
13. Dismounting
Dismounting module 96-PA-RCM or 96-
PA-RCM-EL :
1. Disconnect the system (basic device) from the
power supply!
2. Unlock your module by carefully lifting the
snap-in locking device (fingernail or screw-
driver if necessary) and pull it out of the slot.
Fig. Rear side of the basic device with module, snap-in lock-
ing device and groove
Snap-in locking device
ATTENTION
Handling your module too roughly may cause
damage to the module and result in material
damage!
The snap-in locking device can be damaged or
broken off when unlocking the module.
· Lift the snap-in locking device cautiously
using slight pressure! Preferably use your
fingernail (or a screwdriver, if necessary) to
do so.
ATTENTION
Dismounting or disconnecting the module
while it is communicating with the basic device
will result in a device fault!
In case of missing or disturbed communication of
the basic device to the module during operation,
a warning message appears on the display of the
basic device (cf. section „8.4 Module-relevant
alarms“ on page 41
·Disconnect your system (the basic device)
from the power supply prior to dismounting or
disconnecting the module!
·If necessary, restart the basic device before
reinstallation (cf. section „8.3 Restarting the
basic device“ on page 40)!
Groove Groove