Module 96-PA-RCM / 96-PA-RCM-EL
www.janitza.de
40
8.3 Restarting the basic device
Certain configuration changes require a restart of
your basic device. To do so, proceed as follows:
1. Press button 1 (
Menu
) until the menu is open
.
2. Use the buttons 3/4 (
"
"/"
"
)
to select the
menu item
Configuration
and
confirm with
button 6
Enter
.
Fig. Configuration menu item
Fig. Window Resetting with the Restart menu item
Fig. Window Communication > Field bus configuration
INFORMATION
A detailed description of the
Basic device com-
munication via the RS-485 interface (field bus)
can be found in the user manual of your basic
device.
3. The
Configuration
window appears.
4. In the
Configuration
window, use buttons 3/4
(
“
”/“
”
) to select the item
System
and con-
firm with button 6
Enter
.
5. The System window appears.
6. In the System window, use buttons 3/4
(
“
”/“
”
) to select the item
Reset
and confirm
with button 6
Enter
.
7. The
Reset
window appears.
8. In the
Reset
window, use buttons 3/4
(
“
”/“
”
) to select the item
Restart
and con-
firm with button 6
Enter
.
9. The option
No
blinks.
10. Use button 4 to select the option
Yes
and con-
firm using button 6
Enter
.
11. The basic device will restart.
8.2 Basic device communication via the RS-
485 interface (field bus)
Communication via the RS-485 interface (field
bus) operates identically for basic devices with
and without module and can be accessed on the
user interface as follows:
1.
Basic device with module 96-PA-RCM:
Menu
Configuration
>
Communication
2.
Basic device with module 96-PA-RCM-EL:
Menu
Configuration
>
Communication
>
Field-
bus
