www.janitza.de
45
Module 96-PA-RCM / 96-PA-RCM-EL
C
9.3 Temperature sensor
1. In the
Measurement
window, select the item
Temperature sensor
and press button 6
Enter
.
2. The temperature sensor item blinks.
3. Use buttons 3/4 (
“
”/“
”
)
to select your tem-
perature sensor from the list:
- PT100 (default setting)
- PT1000
- KTY83
- KTY84
4. Confirm using button 6
Enter
.
Fig. Window Measurement > Configuration of the temperature
sensor
INFORMATION
You can also configure the temperature sensor of
your basic device conveniently via the PC connec-
tion to the GridVis
®
software (in scope of delivery).
9.4 Modbus editor
The basic device with module has a
Modbus
editor
in the user interface. The
Modbus editor
item in the
Configuration
window provides access
(read/write) to the Modbus addresses (
Menu >
Configuration > Modbus editor
).
Fig. Window Configuration with the Modbus
editor menu item
Fig. Configuration of the Modbus editor
INFORMATION
A Modbus address list for your basic device can
be found in the download area at www.janitza.de.
Recommendation:
Use the GridVis
®
power grid monitoring software
for all module-relevant settings!
