Module 96-PA-RCM / 96-PA-RCM-EL
www.janitza.de
34
6.14 Ethernet interface
(only module 96-PA-RCM-EL)
The PC connection to the GridVis
®
software can
be made for the basic device with module 96-PA-
RCM-EL via the Ethernet interface.
When connecting the Ethernet interface, ensure
there is sufficient space in the connection area (at
least 50 mm), depending on the bending radius
and the plug type of the Ethernet cable. More
information on the Ethernet connection can be
found in the chap. „5.1 PC connection of the
basic device“ on page 22.
The communication settings for the Ethernet con-
nection of your basic device with module 96-PA-
RCM-EL can be found in chap. „8.1 Basic device
communication via the Ethernet interface (module
96-PA-RCM-EL)“ on page 38.
ATTENTION
Material damage due to incorrect network
settings.
Incorrect network settings can cause faults
in the IT network!
Consult your network administrator for the cor-
rect network settings for your device.
Fig. Ethernet interface for connection to a DHCP
server or PC.
Meaning of the LEDs
LED
Function
Green
Is illuminated when there is a connection
(link)
Yellow Blinks during network activity
INFORMATION
·Use a CAT5 cable for the connection to the Ether-
net interface.
·The standard factory setting of the basic device
with module is DHCP (dynamic assignment of IP
address)! More information on the communication
settings of the basic device with module can be
found in chap. „8.1 Basic device communication
via the Ethernet interface (module 96-PA-RCM-EL)“
·The Ethernet settings can be easily configured in
the GridVis
®
software.
·The transmission of the time of a client device
to server devices can only be configured in the
GridVis
®
software.
