12
Electrical Connection
This oven shall be correctly installed and connected by the authorized
service and according to the manufacturer’s instructions.
The appliance shall be installed in an oven housing which provides high
ventilation.
The electrical connections of the appliance shall be made only by using
grounded sockets equipped with a grounding system laid in accordance
with the instructions. If the place where the appliance shall be installed
is not designed for a grounded system, immediately contact an authorized
service. The manufacturer shall never be responsible for damages caused
by non-grounded sockets, to which the appliance has been plugged.
Your oven’s plug is grounded; make sure that the outlet you shall connect
the plug is grounded, too. The plug shall be placed so that it can be
accessed after installation.
Your oven is manufactured as compatible with the 220-240 V 50/60 Hz. AC
power supply and requires a fuse of 16 Amp. If your power network does not
provide these specifications, contact an electrician or an authorized service.
When you need to replace the fuse, please make sure that the electrical
connection is as follows:
• Brown wire to the phase (live end)
• Blue wire to neutral
• Yellow-green wire to ground terminal
The circuit breaker switches of the oven shall be placed so that end user
can reach them when the oven is installed.
The power supply cord (the cord with plug) shall not contact the hot
parts of the appliance.
If the power supply cord (the cord with plug) is damaged, this cord shall
be replaced by the manufacturer or its service agent or an equally qualified
personnel to prevent a hazardous situation.
GB
