JAI VIS-CAM System TS-1327EN, Installation Manual

Page: 100 / 112

VIS-CAM System
88 Appendix E: Moxa N Port 5232 Configuration
Network Settings:
IP address: Enter the desired IP address of the unit. The default address from the
factory is 192.168.127.254 unless otherwise specified.
Netmask: Enter the subnet mask of the unit. The default subnet mask from the
factory is 255.255.255.0 unless otherwise specified.
Gateway: Enter the default gateway of the unit.
IP Configuration: Specify whether the unit uses static of dynamic IP address.
DNS Server 1 Specify primary DNS server to be used by the unit.
DNS Server 2 Specify secondary DNS server to be used by the unit.
SNMP. Enables / Disables the SNMP protocol.
Auto report to IP: Reports generated by the auto report function will be automatically be
forwarded to IP address specified in this field.
Auto report to TCP Port: Specify the TCP port number for the auto report function. The default
port is 4002.
Auto report period: Time interval for error reporting.
Figure 88. Standard configuration of Network Settings: