SP-5000M-CXP4 / SP-5000C-CXP4
- 60 -
ALC Channel Area
Low Left
R/W
Off
On
JAI-Custom
ALC Channel Area
Middle Low Right
R/W
Off
On
JAI-Custom
ALC Channel Area
Middle Low Middle Right
R/W
Off
On
JAI-Custom
ALC Channel Area
Middle Low Middle Left
R/W
Off
On
JAI-Custom
ALC Channel Area
Middle Low Left
R/W
Off
On
JAI-Custom
ALC Channel Area
Middle High Right
R/W
Off
On
JAI-Custom
ALC Channel Area
Middle High Middle Right
R/W
Off
On
JAI-Custom
ALC Channel Area
Middle High Middle Left
R/W
Off
On
JAI-Custom
ALC Channel Area
Middle High Left
R/W
Off
On
JAI-Custom
ALC Channel Area
High Right
R/W
Off
On
JAI-Custom
ALC Channel Area
High Middle Right
R/W
Off
On
JAI-Custom
ALC Channel Area
High Middle Left
R/W
Off
On
JAI-Custom
ALC Channel Area
High Left
R/W
Off
On
JAI-Custom
8.10 HDR (High Dynamic Range) (SP-5000M-CXP4 only)
HDR sensing mode can be set when HDR Mode is set to ON while Exposure Mode is Timed.
The parameters to configure dynamic range are HDR_SLOPE Level 1, Level 2, Level 3 and
Level 4.
The user can select any one of those parameters as required for their application.
In this mode, the timed exposure is used as the reference and the value selected in
HDR_SLOPE will compensate to get an appropriate dynamic range by changing the exposure
time.
Notes:
1.
If the exposure mode is OFF and the HDR mode is set to ON, the exposure mode is
automatically changed to Timed.
2.
If horizontal binning and/or vertical binning are set to ON, the HDR mode cannot be set.
In this case, the HDR mode must be set first before H-Binning and/or V-Binning are set.
3.
In this mode, exposure overlapped behavior is not available and the frame rate is slower than
the normal operation.
4.
The frame rate should be set more than “The width of FVAL + the exposure time”.
The width of FVAL = (line number x 165) / Sensor clock (86.4 x 10
6
Hz).
The possible frame rate is more than “The width of FVAL + the exposure time + 100 μs)
