SP-5000M-CXP4 / SP-5000C-CXP4
- 33 -
Table 38. Associated GenICam registers
GenICam Name
Access
Values
Category
Exposure Mode
R/W
Off
Timed
TriggerWidth
Acquisition Control
Trigger Mode
R/W
Off, On
Acquisition Control
Trigger Option
R/W
Off, RCT, PIV
JAI-Custom
7.2.2 Exposure Time
This command is effective only when Exposure Mode is set to Timed. It is for setting exposure time.
The setting step for exposure time is 1
μ
sec per step.
Minimum:
10
μsec
Maximum:
8 seconds
Associated GenICam registers
GenICam
Name
Access
Values
Category
Exposure
Mode
R/W
Off
Timed
TriggerWidth
Acquisition Control
Exposure
Time
R/W
10
to
8000000 [us] Acquisition Control
Exposure
Time
Raw
R/W
10
to
8000000 [us] Acquisition Control
7.2.3 Exposure Auto
This is a function to control the exposure automatically. It is effective only for Timed.
JAI ALC Reference controls the brightness.
There are three modes, OFF, Once and Continuous.
OFF:
No exposure control
Once:
Exposure adjusts when the function is set, then remains at that setting
Continuous:
Exposure continues to be adjusted automatically
In this mode, the following settings are available.
ALC Speed:
Rate of adjustment can be set (Common with GainAuto)
Exposure Auto Max:
The maximum value for the exposure time to be controlled can
be set
Exposure Auto Min:
The minimum value for the exposure time to be controlled can
be set
ALC Reference:
The reference level of the exposure control can be set
(Common with GainAuto)
ALC Channel area:
The measurement area of the exposure control can be set
(Common with GainAuto)
