SP-5000M-CXP4 / SP-5000C-CXP4
- 51 -
Balance White Channel Area
Middle Low Left
R/W
Off
On
JAI-Custom
Balance White Channel Area
Middle High Right
R/W
Off
On
JAI-Custom
Balance White Channel Area
Middle High Middle Right
R/W
Off
On
JAI-Custom
Balance White Channel Area
Middle High Middle Left
R/W
Off
On
JAI-Custom
Balance White Channel Area
Middle High Left
R/W
Off
On
JAI-Custom
Balance White Channel Area
High Right
R/W
Off
On
JAI-Custom
Balance White Channel Area
High Middle Right
R/W
Off
On
JAI-Custom
Balance White Channel Area
High Middle Left
R/W
Off
On
JAI-Custom
Balance White Channel Area
High Left
R/W
Off
On
JAI-Custom
8.3. LUT
This function can be used to convert the input to the desired output characteristics.
The Look-Up Table (LUT) has 256 points for setup. The output level can be created by multiplying
the gain data by the input level.
8.3.1 LUT Mode
Can be selected from OFF, Gamma or LUT.
OFF
OFF Gamma or LUT function
Gamma
Set the gamma from 16 steps
LUT
Enable LUT which is selected by LUT Selector and LUT Control
8.3.2 LUT Control
This will convert the linear characteristic of the input and output relations to required
characteristics. User can set the required characteristics by setting 256 setting points.
8.3.3 LUT Selector
Select which data can be used for LUT data loading or writing.
Mono: Mono
Color: Red/Green/Blue
8.3.4 LUT Index
This represents the “starting” or “input” pixel value to be modified by the Lookup Table. The
SP-5000-CXP4 has a 256-point Lookup Table, meaning the index points are treated like an 8-bit
image with 0 representing a full black pixel and 255 representing a full white pixel. The index
points are automatically scaled to fit the internal pixel format of the camera. This is common
for all output configurations.
