JAI RM-2040GE Series, User Manual

Page: 30 / 68

RM/TM-2040GE Series
28 Functions & Operations
Note: 1 The Mono10, Mono12, BayerGR10, and BayerGR12 settings at full frame rate will exceed GigE
bandwidth. It is recommended to use Mono10Packed or Mono12Packed for max frame rate.
For TM-2040GE cameras, the jumbo frame can be set at a maximum 16260 Bytes (Factory setting is 1428 Bytes).
To set Jumbo Frames, refer to section 4.3.4.
To ensure the integrity of packets transmitted from the camera it is recommended to follow these simple
guidelines:
Whenever possible use a peer-to-peer network.
When connecting several cameras going though a network switch, make sure it is capable of handling jumbo
packets and that it has sufficient memory capacity.
Configure inter-packet delay to avoid congestion in network switches.
Disable screen saver and power save functions on computers.
Use high performance computers with multi-CPU, hyper-thread and 64-bit CPU, etc.
Only use Gigabit Ethernet equipment and components together with the camera.
Use at least Cat5e or preferably Cat6 Ethernet cables.
Whenever possible, limit the camera output to Mono8, Mono10Packed or Mono12Packed for Monochrome
cameras, and BayerGR8 for color.
4.3.3 Disable Firewalls
To ensure proper operation of the JAI SDK & Control Tool, all firewalls must be disabled. This also includes the
Windows firewall.
Click [Start], [Control Panel] for accessing the Windows
firewall configuration.
4.3.4 Enabling Jumbo Frame
(1) Click [Start] and click [Control Panel].
(2) Click [Performance and Maintenance].
(3) Click [System].
(4) Click [Hardware] tab.
(5) Click [Device Manager]