Installation
9
RM/TM-2040GE Series
2
Installation
The following instructions are provided to help you to set up your camera. We suggest that you read through
these instructions before you unpack and set up the camera system.
2.1
Getting Started
2.1.1
Unpacking Instructions
We recommend that you save the original packing cartons for the cameras and accessories in case you need to
return or exchange an item.
We also recommend that you bench-test any equipment being sent to another location for field installation to
assure that everything is fully operational as a system.
2.1.2
Components
When you receive your TM-2040GE camera from JAI Inc., the contents of the shipping box should include the
camera and a document download card. If either of these items are missing, please contact your JAI Inc.
representative immediately. The document download card includes instructions and web locations for
downloading the datasheet, manual, and camera-control software. If you do not have Internet access, please
contact JAI Inc. to receive this material on a CD-ROM.
2.1.3
Accessories and Options
Following is a list of additional accessories and options that may be required for your application. Please check
with your JAI Inc. representative before you install your camera to determine what you might need.
•
PD-12U series power supply
•
12P-02S power cable
•
Cat5e or cat6 shielded Ethernet cable (not supplied by JAI Inc.)
•
Tripod Mounting Kit: TP-20
(for dimensions go to:
www.jai.com/EN/CameraSolutions/Products/Accessories/Pages/Home.aspx
)
2.2
Camera Setup
2.2.1
Heat Dissipation
The TM-2040GE is a compact 1600 by 1200 camera. Since all the electronics have been packed in a compact
package, the outer case of the camera can become hot due to heat dissipation. For optimal performance, JAI
Inc. recommends using a cooling fan to set up a positive air flow around the camera and following the
precautions below.
•
Mount the camera on a large heat sink (camera bracket) made out of heat-conductive material like
aluminum.
•
Make sure the flow of heat from the camera case to the bracket is not blocked by a non-conductive
material like plastic.
•
Make sure the camera has enough open space around it to facilitate the free flow of air.
2.2.2
Connector Pin Configurations
2.2.2.1
12-Pin Connector
The TM-2040GE has a 12-pin Hirose connector for power input as shown below.
Summary of Contents for RM-2040GE Series
Page 1: ...RM TM 2040GE RMC TMC 2040GE Progressive Scan Cameras Document Version E Document P N 10447 ...
Page 2: ......
Page 66: ......
Page 67: ......