JAI Go-X Series User Manual Download Page 30

Page: 30 / 88

Go-X Series GigE Vision I/F

Calculate the maximum frame rate

(approximate)

This section describes how to calculate the maximum frame rate (approximate). The

maximum frame rate is as follows depending on the sensor’s scanning range and the GigE

bandwidth.

■

The maximum frame rate (GigE bandwidth)

Interface_FR[Hz] = BandwidthPerPixelFormat x 1000000 ÷ (Width x Height)*)

*) When using the Binning function, specify the number of pixels and number of lines after

Binning for the Width and Height values.

■

The

maximum frame rate (Sensor’s scanning rate

)

Sensor_FR[Hz] = 1000000 ÷ (H_Period x (Height-S + InvalidLine) )
H_Period = MAX(HMAX_Period, HMAX_Width)

HMAX_Width = (PixelSizeCount / 111375) x Width-S
*) For the values of Width-S and Height-S, specify the number of pixels read from the

sensor and the number of lines.

(Number of pixels and number of lines before Binning).

*) In GOX-2402M-PGE, 2x2 binning is processed on the image sensor. Therefore,

the maximum sensor frame rate can be increased.

In this case, for the values of Width-S and Height-S, specify the number of pixels and

the number of lines after Binning.

Please refer to tables below for PixelSizeCount, BandwidthPerPixelFormat, HMAX_Period and

InvalidLine.

— 30 —

Pixelformat

PixelSizeCount

BandwidthPerPixelFormat

Mono8

Bayer8

Mono10Packed

Bayer10Packed

Mono12Packed

Bayer12Packed

Mono10
Mono12

Bayer10
Bayer12

594

891

1188

115

76.6

57.5

Model name

HMAX_Period

InvalidLine

GOX-2402M-PGE
GOX-2402C-PGE
GOX-3201M-PGE
GOX-3201C-PGE
GOX-5103M-PGE
GOX-5103C-PGE
GOX-8901M-PGE
GOX-8901C-PGE
GOX-12401M-PGE
GOX-12401C-PGE

10.586

11.394

13.415

21.738

*) In GOX-2402M-PGE, 2x2 binning is processed on the image sensor. Therefore,

the maximum sensor frame rate can be increased.

When the 2x2 binning is used, the value of HMAX_Period is 5.98 instead of 10.586.

Summary of Contents for Go-X Series

























































































Search results

Summary of Contents for Go-X Series

Reviews:

Related manuals for Go-X Series

Brands by name

Popular brands

JAI Go-X Series, User Manual

Search results

Summary of Contents for Go-X Series

Reviews:

Related manuals for Go-X Series

Brands by name

Popular brands