13. USER SETTINGS
13.1. ACCESS TO THE USER SETTINGS
Press
for 5 seconds to enter into the programming mode. The cursor moves to ‘setting day and
time’. Press
twice to move to ‘user settings’. Press
.
Setting day
and time
Program
settings
User
settings
5 sec
1
2
3
4
5
6
7
8
1. Backlight
setting
2. Eco mode temperature lowering-level
3. Frost protection temperature
4. Comfort setpoint temperature limit
5. Maximal Boost duration
6. Maximum ambient temperature
7. Temperature
unit
8. Restoring factory settings
13.2. SETTING SEQUENCE
All settings are consecutive. To exit the user settings, press
twice.
13.2.1. Backlight setting
Three modes can be set.
1. Press or
to choose the setting you require.
– L1: Temporary backlighting - backlight of the display when a
button is pressed.
– L2: Non-stop backlighting - backlight of the display all the time
– L3: the device will work according to the L1 mode.
(default setting)
2. Press to save and move to the next setting.
13.2.2. Eco mode temperature lowering-level
The drop in temperature is set at -3.5°C compared to the set temperature of the Comfort mode. You
can adjust the lowered level from -1°C to -8°C, by intervals of 0.5°C.
Important: whatever the lowering level set, the Eco setting temperature
will never exceed 19°C.
3. Press or
to obtain the temperature level you require.
4. Press to save and move to the next setting.
13.2.3. Frost Protection temperature
Your device is preset at 7°C. You can adjust the Frost Protection tempera-
ture from 5°C to 15°C, by intevals of 0.5°C.
5. Press or
to obtain the temperature you require.
6. Press to save and move to the next setting.
1
1
82
Summary of Contents for HEDW.094040
Page 2: ...2 NL PG 3 PG 26 PG 49 PG 72 FR DE EN 2...
Page 95: ...NOTES 95 EN...
