5. BOOST FEATURE
The Boost mode can be enabled at any time, whatever the current operating mode (Auto, Comfort,
Eco or Frost protection). To activate Boost mode, press
, the desired temperature setting will be
set at maximum for the time period you request. 60 minutes display will flash by default.
5.1. FIRST PRESS - BOOST
If the ambient temperature reaches the maximal Boost
temperature during the count. The device switches
off but the Boost mode is always active : the count is
always displayed, the Boost symbol and the heating
indicator flash on the display. When the temperature
drops under the maximal authorised temperature, the
device will be restarted until the count ends.
An order “Stop” has been sent by your energy mana-
ger through the pilot wire. The device stops, ‘--’
appears. The cursor moves above auto. When the
order ‘Comfort’ will be sent, the device will be restarted
until the count end.
During the first minute: the boost symbol and the heating
indicator appear and the duration count flash. During the
first minute, you can modify the boost duration from 0 to
the maximal authorised duration of the boost, such as
defined during the user settings
(see 13. user settings for more
details)
by intervals of 5 minutes (or more quickly by push
superior to 2 seconds) by pressing
and
.
This modification will be saved and effective for the next Boost. After 1 minute, the boost count
begins and the time is running, minute by minute.
After 1 minute, you can modify temporarily the duration: it will be valid only for this active boost
and therefore non-recurring.
5.1.1. The Boost can stop for 2 different reasons:
5.2. SECOND PRESS - BOOST CANCELLATION
The cursor moves above the previous active mode and the setting temperature appears.
77
EN
Summary of Contents for HEDW.094040
Page 2: ...2 NL PG 3 PG 26 PG 49 PG 72 FR DE EN 2...
Page 95: ...NOTES 95 EN...
