JADEVER SCALE
SNUG III
5
4. Press down button
to display “Unit weight of article” and “Counting value” in a
cyclic manner.
Caution: the minimum unit weight of sampled article
≥
9 resolutions. (For example:
the weight of sampled article for 600g/0.01g should not be less than 0.09g)
3-3 Specification of percentage function
1. Under the weighing mode, press down button
to show XXXX % on screen and to
enter the percentage function.
2. Then press down button
to enter the sampling mode for percentage function; this
time screen will show SE 0pcs ; then press down button
to select one out of
the following five sampling quantities in cyclic manner: 20, 50,100, 200, and 500.
3. After selecting the sampling quantity, place the article whose quantity is the same with
the selected one on the scale pan, and press down button
to begin sampling;
when the sound “bi” is heard and “SE” is disappeared, the sampling process is
completed.
4. Press down button to display “Unit weight of article” and “Percentage” in a cyclic
manner.
。
Caution: the minimum unit weight of sampled article
≥
9 resolutions. (For example:
the weight of sampled article for 600g/0.01g should not be less than 0.09g)
3-4 Setting of time and date
1. After starting, press down button to show time XX.XX T on screen.
2. Press down continuously button to shift months XX.XX D and years XXXX Y.
3. Shift to the part to be modified, press down button to shift for selecting the digit to
be modified, and the selected digit will flash this time; then press down button to shift
among 1~9 sequentially, and press down button to exit after completing the setting.
